MEGAPLATE
Mica insulated strip heaters

 • Mica Strip Heaters Construction overview
• Mica Strip Heaters Termination styles
• Mica Strip Heaters Screw terminals
 
Screw terminals

Screws are the most commonly used terminals on strip heaters. Care should be taken not to tighten these screws excessively; otherwise, the connection between the resistance wire and the screw could be damaged. #10-32 screws are standard; other sizes are available.
 
A Style Screw terminals at opposite ends. B1 Style Parallel screw terminals along the width B2 Style Parallel screw terminals along the length.
 

Lead wire terminals exiting from the side or the end

Single or double ended mica high temperature wire with or without stainless steel braid eliminate the bump over the wire at the exit point and to have a smooth surface, a pressure plate could be used.
L & LF Styles J & JF Styles
 
Mounting slots, holes and cutouts can be incorporated into the design of the strip heaters without compromising watt density and heater performance. However, there are design limitations to be considered and the factory should be consulted prior to placing any orders.

 
   
 

 


Copyright © 1997 Equiplast Inc. All rights reserved.